DS-3E3700-H

High-Performance Gigabit Ethernet Switch

  • Implement hardw are-based IPv4/IPv6 dual-stack platform, rich IPv4 and IPv6 Layer 3 routing protocols, multicast technology, and policy routing mechanism to provide users w ith a complete IPv4/IPv6 solution.
  • Supports SNMP traps or syslog w ith LLDPtable changes, STP Topology Changes, New root bridge, Optical Pow er SFP threshold alarms, Interface UP & Dow n.
  • Supporting virtualization technology is to connect multiple physical devices to each other and make them virtual as a logical device. Users can view these multiple devices as a single device for management and use.
  • Support Auto MDI-II/MDI-X uplink for all the tw isted pair ports.
  • Supports 64 Gbps full duplex line rate traffic.
  • Support 802.1D spanning tree control/RSTP support and MSTP.
  • Support 802.1Q VLAN, 802.1p Priority queues.
  • Supports centralized MAC address authentication, 802.1x authentication, and PORTAL authentication. It supports dynamic or static binding of user IDs such as user accounts, IP, MAC, VLAN, and port. Also support dynamics implementing of user policies (VLAN, QoS, and ACL).
  • Provides enhanced ACL control logic, supports large-capacity ingress and egress port ACLs, and supports VLAN-based ACL

implementation. This simplifies the user configuration process and avoids the w aste of ACLresources.

  • Multiple reliability protection at the device level and link level.
  • As per EN61000-4-5 standard supports Surge Protection on pow er input and on Ethernet ports as per EN61000-4-5 standard\
  • Support ITU-T G.8032 Ethernet Ring protection for Loop Protection and fast convergence time (Sub 50 ms) in ring topologies/ IEEE 802.1W RSTP for Sub Second failover.
  • Support management features viz. Web-based GUI/SSH, SNMP, TFTP Client System Log, ,supports port Trunking of 2 Nos. GE/10GE ports
  • Supports the pluggable AC and DC pow er modules and the pluggable dual-fan reliability design. The AC or DC pow er modules can be flexibly configured according to the requirements of the actual environment. In addition, alarms of the pow er supply and fans are supported. The fan speed can be adjusted automatically based on changes in temperature. These designs give the device greater reliability.
  • L2 to L4 packet filtering is provided to provide traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN. A flexible queue scheduling algorithm is provided, w hich can be set based on ports and queues at the same time, and supports three modes: SP (Strict Priority), WRR (Weighted Round Robin), and SP+WRR.
  • Supports jumbo frame & should have at least 16K MAC address.
  • Supports 802.1W RSTP for Ring /STP topology.
  • Supports Quality of Service (QoS) features viz. Priority Queue, Class of Service (CoS), Rate Limiting (Bandw idth Control), Strict Priority Queue (SPQ), Weighted Round Robin (WRR) or better, DOS attack prevention.
  • Supports IEC 60950, CE.FCC
  • Designed for 24x7 environment.
  • Supports Link Layer Discovery Protocol.\
  • Supports Broadcast/Multicast/Unicast Storm Control.
Download

More Products From Transmission & Display