China 
Australia
Arabic
Brazil 
Canada
Europe 
France 
Hong Kong
Italy 
Indonesia
America 
Spain 
Turkey 
Ireland Categories
- Presence Detector
- Thermal Network Turret Camera
- Thermal Network Bullet Camera
- Thermal Bi-spectrum Network Bullet Camera
- Solar power kits
- Thermal & Optical Bi-spectrum Network Speed Dome
- Bi-spectrum Mobile Thermal PTZ Camera
- Bi-spectrum Thermography Mini Positioning system
- Thermal Smart linkage Tracking System
- Thermal & Optical Bi-spectrum Network Positioning System
- Bi-spectrum Thermal Sphere PTZ camera
- Thermographic Turret Thermal Camera
- Dual Lens Dome
- Fever Screen Camera
- Dual Lens PTZ
- Dual Lens PT Positioner
- Thermographic cube camera
- Handheld thermometric camera
- Thermographic Thermal camera
- Thermal Presence Detector
- Network Stable PTZ Camera
- Network Bullet Camera
- Handheld Observational Camera
- Network Speed Dome
- Thermal Positioning System
Network Switch
DS-3E0105P-E/M
PoE Switch
DS-3E0105P-E/M
PoE Switch
- Ports 1 to 4 support IEEE 802.3af standard.
- When the switch is in EXTEND mode and the data rate is 10 Mbps, ports 1 to 4 support long-distance data transmission up to 250 meters.
- All ports support 6 kV lightning protection.
- This switch supports Auto MDI/MDIX.
- This switch supports store-and-forward.
- This switch supports MAC address auto learning and auto aging.
- This switch supports smart cache optimization.
- This switch supports desktop / wall mounting.
DS-3E0109P-E/M
Unmanaged PoE Switch
DS-3E0109P-E/M
Unmanaged PoE Switch
- 9*10/100 Base-TX Ethernet ports
- Supports standard and EXTEND network mode
- Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab Ethernet standards
- Store-and-Forward switching
- 4K MAC address table and MAC address learning
- 1.8 Gbps backplane bandwidth
- All-mental construction
- Desktop and wall-mounted installation
DS-3E0508-E
Unmanaged Gigabit Switch
DS-3E0508-E
Unmanaged Gigabit Switch
- Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab Ethernet standard
- 8*10/100/1000Mbps auto-negotiation RJ45 Ports
- Plug and play without configuration
- Up to 16 Gbps back panel bandwidth and supports non-blocking wire-speed forwarding
- LEDs to easily monitor link speed, activity and find problems in time
- IEEE802.3x full duplex flow control and half duplex backpressure flow control
- Loop detection and loop prevention
- Up to 4 kV lightning-proof for each port
- Desk & wall-mounting installation.
- Full-metal & larger shell ensure effective cooling
DS-3E3728-H
24 个 10/100/1000BASE-T ports （8 of themis Giga SFP Combo ports），4 10G/1G BASE-X SFP+ ports
DS-3E3728-H
24 个 10/100/1000BASE-T ports （8 of themis Giga SFP Combo ports），4 10G/1G BASE-X SFP+ ports
- Supports rich and flexible port expansion boards, including 8-port 10G SFP expansion boards and 2-port 40G expansion boards, enabling
-
high-density and high-performance port expansion to meet the needs of large-scale netw ork aggregation or small and medium-sized netw ork core deployment as w ell as the requirement of Fiber and Lan cable mixed netw orking.
-
- Implement hardw are-based IPv4/IPv6 dual-stack platform, rich IPv4 and IPv6 Layer 3 routing protocols, multicast technology, and policy routing mechanism to provide users w ith a complete IPv4/IPv6 solution.
- Supports SNMP traps or syslog w ith LLDPtable changes, STP Topology Changes, New root bridge, Optical Pow er SFP threshold alarms, Interface UP & Dow n.
- Supporting virtualization technology is to connect multiple physical devices to each other and make them virtual as a logical device. Users can view these multiple devices as a single device for management and use.
- Support Auto MDI-II/MDI-X uplink for all the tw isted pair ports.
- Supports 64 Gbps full duplex line rate traffic.
- Support 802.1D spanning tree control/RSTP support and MSTP.
- Support 802.1Q VLAN, 802.1p Priority queues.
- Supports centralized MAC address authentication, 802.1x authentication, and PORTAL authentication. It supports dynamic or static binding of user IDs such as user accounts, IP, MAC, VLAN, and port. Also support dynamics implementing of user policies (VLAN, QoS, and ACL).
- Provides enhanced ACL control logic, supports large-capacity ingress and egress port ACLs, and supports VLAN-based ACL
-
implementation. This simplifies the user configuration process and avoids the w asteof ACLresources.
-
- Multiple reliability protection at the device level and link level.
- As per EN61000-4-5 standard supports Surge Protection on pow er input and on Ethernet ports as per EN61000-4-5 standard\
- Support ITU-T G.8032 Ethernet Ring protection for Loop Protection and fast convergence time (Sub 50 ms) in ring topologies/ IEEE 802.1W RSTP for Sub Second failover.
- Support management features viz. Web-based GUI/SSH, SNMP, TFTP Client System Log, ,supports port Trunking of 2 Nos. GE/10GE ports
- Supports the pluggable AC and DC pow er modules and the pluggable dual-fan reliability design. The AC or DC pow er modules can be flexibly configured according to the requirements of the actual environment. In addition, alarms of the pow er supply and fans are supported. The fan speed can be adjusted automatically based on changes in temperature. These designs give the device greater reliability.
- L2 to L4 packet filtering is provided to provide traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN. A flexible queue scheduling algorithm is provided, w hich can be set based on ports and queues at the same time, and supports three modes: SP (Strict Priority), WRR (Weighted Round Robin), and SP+WRR.
- Supports jumbo frame & should have at least 16K MAC address.
- Supports 802.1W RSTP for Ring /STP topology.
- Supports Quality of Service (QoS) features viz. Priority Queue, Class of Service (CoS), Rate Limiting (Bandw idth Control), Strict Priority Queue (SPQ), Weighted Round Robin (WRR) or better, DOS attack prevention.
- Supports IEC 60950, CE.FCC
- Designed for 24x7 environment.
- Supports Link Layer Discovery Protocol.\
- Supports Broadcast/Multicast/Unicast StormControl.
DS-3E3728F-H(B)
24 个 100/1000Base-X SFP ports（8 of themis GE Combo port）
DS-3E3728F-H(B)
24 个 100/1000Base-X SFP ports（8 of themis GE Combo port）
- Supports rich and flexible port expansion boards, including 8-port 10G SFP expansion boards and 2-port 40G expansion boards, enabling
-
high-density and high-performance port expansion to meet the needs of large-scale netw ork aggregation or small and medium-sized netw ork core deployment as w ell as the requirement of Fiber and Lan cable mixed netw orking.
-
- Implement hardw are-based IPv4/IPv6 dual-stack platform, rich IPv4 and IPv6 Layer 3 routing protocols, multicast technology, and policy routing mechanism to provide users w ith a complete IPv4/IPv6 solution.
- Supports SNMP traps or syslog w ith LLDPtable changes, STP Topology Changes, New root bridge, Optical Pow er SFP threshold alarms, Interface UP & Dow n.
- Supporting virtualization technology is to connect multiple physical devices to each other and make them virtual as a logical device. Users can view these multiple devices as a single device for management and use.
- Support Auto MDI-II/MDI-X uplink for all the tw isted pair ports.
- Supports 64 Gbps full duplex line rate traffic.
- Support 802.1D spanning tree control/RSTP support and MSTP.
- Support 802.1Q VLAN, 802.1p Priority queues.
- Supports centralized MAC address authentication, 802.1x authentication, and PORTAL authentication. It supports dynamic or static binding of user IDs such as user accounts, IP, MAC, VLAN, and port. Also support dynamics implementing of user policies (VLAN, QoS, and ACL).
- Provides enhanced ACL control logic, supports large-capacity ingress and egress port ACLs, and supports VLAN-based ACL
-
implementation. This simplifies the user configuration process and avoids the w asteof ACLresources.
-
- Multiple reliability protection at the device level and link level.
- As per EN61000-4-5 standard supports Surge Protection on pow er input and on Ethernet ports as per EN61000-4-5 standard\
- Support ITU-T G.8032 Ethernet Ring protection for Loop Protection and fast convergence time (Sub 50 ms) in ring topologies/ IEEE 802.1W RSTP for Sub Second failover.
- Support management features viz. Web-based GUI/SSH, SNMP, TFTP Client System Log, ,supports port Trunking of 2 Nos. GE/10GE ports
- Supports the pluggable AC and DC pow er modules and the pluggable dual-fan reliability design. The AC or DC pow er modules can be flexibly configured according to the requirements of the actual environment. In addition, alarms of the pow er supply and fans are supported. The fan speed can be adjusted automatically based on changes in temperature. These designs give the device greater reliability.
- L2 to L4 packet filtering is provided to provide traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN. A flexible queue scheduling algorithm is provided, w hich can be set based on ports and queues at the same time, and supports three modes: SP (Strict Priority), WRR (Weighted Round Robin), and SP+WRR.
- Supports jumbo frame & should have at least 16K MAC address.
- Supports 802.1W RSTP for Ring /STP topology.
- Supports Quality of Service (QoS) features viz. Priority Queue, Class of Service (CoS), Rate Limiting (Bandw idth Control), Strict Priority Queue (SPQ), Weighted Round Robin (WRR) or better, DOS attack prevention.
- Supports IEC 60950, CE.FCC
- Designed for 24x7 environment.
- Supports Link Layer Discovery Protocol.\
- Supports Broadcast/Multicast/Unicast StormControl.
-
DS-3E3752F-H
48 个 100/1000Base-X SFP ports，4 10G/1G BASE-X SFP+ ports
DS-3E3752F-H
48 个 100/1000Base-X SFP ports，4 10G/1G BASE-X SFP+ ports
- Supports rich and flexible port expansion boards, including 8-port 10G SFP expansion boards and 2-port 40G expansion boards, enabling
-
high-density and high-performance port expansion to meet the needs of large-scale netw ork aggregation or small and medium-sized netw ork core deployment as w ell as the requirement of Fiber and Lan cable mixed netw orking.
-
- Implement hardw are-based IPv4/IPv6 dual-stack platform, rich IPv4 and IPv6 Layer 3 routing protocols, multicast technology, and policy routing mechanism to provide users w ith a complete IPv4/IPv6 solution.
- Supports SNMP traps or syslog w ith LLDPtable changes, STP Topology Changes, New root bridge, Optical Pow er SFP threshold alarms, Interface UP & Dow n.
- Supporting virtualization technology is to connect multiple physical devices to each other and make them virtual as a logical device. Users can view these multiple devices as a single device for management and use.
- Support Auto MDI-II/MDI-X uplink for all the tw isted pair ports.
- Supports 64 Gbps full duplex line rate traffic.
- Support 802.1D spanning tree control/RSTP support and MSTP.
- Support 802.1Q VLAN, 802.1p Priority queues.
- Supports centralized MAC address authentication, 802.1x authentication, and PORTAL authentication. It supports dynamic or static binding of user IDs such as user accounts, IP, MAC, VLAN, and port. Also support dynamics implementing of user policies (VLAN, QoS, and ACL).
- Provides enhanced ACL control logic, supports large-capacity ingress and egress port ACLs, and supports VLAN-based ACL
-
implementation. This simplifies the user configuration process and avoids the w asteof ACLresources.
-
- Multiple reliability protection at the device level and link level.
- As per EN61000-4-5 standard supports Surge Protection on pow er input and on Ethernet ports as per EN61000-4-5 standard\
- Support ITU-T G.8032 Ethernet Ring protection for Loop Protection and fast convergence time (Sub 50 ms) in ring topologies/ IEEE 802.1W RSTP for Sub Second failover.
- Support management features viz. Web-based GUI/SSH, SNMP, TFTP Client System Log, ,supports port Trunking of 2 Nos. GE/10GE ports
- Supports the pluggable AC and DC pow er modules and the pluggable dual-fan reliability design. The AC or DC pow er modules can be flexibly configured according to the requirements of the actual environment. In addition, alarms of the pow er supply and fans are supported. The fan speed can be adjusted automatically based on changes in temperature. These designs give the device greater reliability.
- L2 to L4 packet filtering is provided to provide traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN. A flexible queue scheduling algorithm is provided, w hich can be set based on ports and queues at the same time, and supports three modes: SP (Strict Priority), WRR (Weighted Round Robin), and SP+WRR.
- Supports jumbo frame & should have at least 16K MAC address.
- Supports 802.1W RSTP for Ring /STP topology.
- Supports Quality of Service (QoS) features viz. Priority Queue, Class of Service (CoS), Rate Limiting (Bandw idth Control), Strict Priority Queue (SPQ), Weighted Round Robin (WRR) or better, DOS attack prevention.
- Supports IEC 60950, CE.FCC
- Designed for 24x7 environment.
- Supports Link Layer Discovery Protocol.\
- Supports Broadcast/Multicast/Unicast StormControl.
